b. Installation of the camera:
Choose a suitable location to install the camera(s). As far as possible your system must be
installed in a dust-free place, with low vibrations and a good air circulation.
When installing the camera(s), check the good reception of images on the monitor before
the final installation.
Fixing the camera bracket
(Then reverse the direction of the image with the remote control button
Important!
Do not rotate the cameras in front of direct sun light or strong light.
c. Connection of the cameras to the monitor
Connect the cables of the cameras to the colour / colour extension wires.
Connection of the "cameras" extension wires to the monitor:
Camera 1: Red: Power supply red male jack
Yellow: Yellow male RCA to VIDEO IN1
White: White male RCA to AUDIO IN1
Camera 2: Red: Power supply red male jack
Yellow: Yellow male RCA to VIDEO IN2
White: White male RCA to AUDIO IN2
C1
C2
White
Yellow
Red
White
Yellow
Red
CFI EXTEL WESV 87053 - 07/2009 - V1
White
Yellow
Red
White
Yellow
Red
).
7GB