Description Of The Remote Control; Fm Radio Function - Party Light & Sound PARTY-12RGB Manuel D'utilisation

DESCRIPTION OF THE REMOTE CONTROL

1. MUTE: Mutes the sound output
2. Input selector: Press this button to switch between the various inputs (AUX, USB, TF,
Bluetooth, FM)
3. REC: Press to record your voice
4. REC PLAY: Press to play your record
5. Increase the volume
6. Select previous file
7. Play/Pause/Select
8. Select next file
9. Reduce the volume
10. Repeat tracks / random play
11. Equalizer: Cycles through the various music styles: Normal – Rock – Classic – Jazz –
Pop
12. Number buttons for direct input of a file number. Press the number of the file to ac-
cess it directly. For files numbers above 9, press 1+ the unit. Ex. For file number 15,
press 1 + 5. For file number 38, press 3+8
CONNECTION OF A WIRED MICROPHONE (not included)
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound output.
USING THE WIRELESS MICROPHONE
⠗ Open the battery compartment and insert two AA batteries with the correct polarity.
⠗
Turn the switch on the mic to ON. If the power indicator lamp doesn't flash or doesn't light up, check if the
battery has been properly inserted.
⠗ Extend the antenna on the rear panel of the unit to its full length in a vertical position.
⠗ Start singing into the microphone and adjust the volume to the desired level.
⠗ The antenna must not touch any metal object.
⠗ When the indicator lamp on the mic lights up, you have to replace the battery.
⠗ Don't use the microphone close to the speaker in order to avoid feedback.
KARAOKE Function
This feature is available with any input. Play a track through AUX/USB/TF/FM/Bluetooth, connect a microphone
and sing along.
Built-in REC function
1. Plug a microphone into the MIC IN input.
2. Insert a USB/TF card into the corresponding port. Press Input selector button and select USB/TF mode.
3. If the USB/TF card is plugged into the speaker for the first time, the system will automatically create a folder
named 'record' to save the recorded files.
4. When you are ready to record, press REC button to record the sound of the wireless or wired microphone.
USB/TF Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could generate
interference. If the speaker stops working, switch it off and on again, or unplug USB/TF card and re-plug it. The
speaker should be back to normal status.
The maximum size of USB/TF device that can be connected is 32 GB.
Supported music formats: MP3, WMA

FM RADIO FUNCTION

1. Turn on the unit and press repeatedly the input selector key on unit and select FM function (the display will
show the frequency).
2. Press the PLAY/PAUSE button on the unit or the key  on remote control to activate the auto memory (the
radio starts an automatic search for available radio stations and saves them automatically). The station's
number stored depends on the radio signal in your area. During the search, press PLAY button on the remote
control to stop searching.
3. Use the  and  keys to listen to the various radio stations saved in memory.
6
EN
1
MUTE
2
3 4
5
REC REC
PLAY
VOL+
6 8


SCAN
7
VOL-
9
10 11
12