Saci pumps [e]Winner Manuel D'installation Et D'entretien page 34

10 SETUP MENU
8 PROGRAMMES
Par. Description
8.30 Rename sched. Prog 3
8.31 Flow sched. Prog 3
8.32 Start sched. Prog 3
8.33 End sched. Prog 3
8.34 Output status sched. Prog 3
8.35 Schedule programme 4
8.36 Rename sched. Prog 4
8.37 Flow sched. Prog 4
8.38 Start sched. Prog 4
8.39 End sched. Prog 4
8.40 Output status sched. Prog 4
9 ANTIFREEZE
Par. Description
Presence of temperature
9.1
probe
9.2 Antifreeze flow
[e] Winner
34
VALUES
Units
Default Min.
TP3
m /h 15 5
3
min 0:00
0:00
OFF / OUTPUT 1 /
OFF
OUTPUT 2
OFF L
TP4
m /h 15 5
3
min 0:00
0:00
OFF / OUTPUT 1 /
OFF
OUTPUT 2
VALUES
Units
Default Min.
NO NO
m /h 5 5
3
Max.
To enter the name you wish to appear
when the hourly programming is
activated
Flow at which the pump will function
30 during the time period programmed in
TP3
Start time of schedule programme 3
End time of schedule programme 3
Output that you will activate when you
enter the programme
To determine the days of the week that
M-Su
the time periods of TP4 will function
To enter the name you wish to appear
when the hourly programming is
activated
Flow at which the pump will function
30 during the time period programmed in
TP4
Start time of schedule programme 4
End time of schedule programme 4
Output that you will activate when you
enter the programme
Max.
If there is an NTC temperature probe
YES
connected to the 24V output
Flow at which the water will recirculate
Par 1.6 when the low temperature signal is
received to prevent freezing
Notes
Notes