Ribimex Ribitech PRS30 / 310106 Manuel D'instructions Et D'utilisation page 27

2. Unscrew the nut (a) in clockwise direction.
3. Remove the clamping nut (a).
4. Remove the worn out or damaged wheel (5).
5. Insert a new wheel (refer to the dimensional characteristics)
6. Insert the nut (a) and screw firmly [without damaging the nut (a) and threading (b)].
7. Install an attachment.
8. Switch on tool and operate without load to make sure it is properly assembled.
9. Warning! Do NOT use a grinding wheel that is worn, broken, cracked or damaged.
Use only original grinding wheels or grinding wheels recommended by tool manufacturer.
6.3- Service
a) Have your tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
b) Have your tool repaired by a qualified person
Unless otherwise indicated in this instruction manual, repairs or replacement of any damaged part
in an authorised service centre is recommended.
This electric tool is in accordance with the relevant safety requirements. Repairs should only be
carried out by qualified persons using original spare parts; otherwise this may result in
considerable danger to the user.
c) Maintain tool with care
Keep tool clean for better and safer performance.
d) Storage
- Store product, instructions manual and accessories in its original packaging.
- Product must be stored in a clean, dry location. Always lock up product and keep out of reach of
children
6.4- Handling, transport and storage of grinding wheels
Discs are fragile and susceptible to shocks and impacts.
Therefore special precautions are necessary:
a) Do not drop the disc and avoid impacts.
b) Do not use a disc that has fallen down or that is damaged.
c) Avoid strong vibrations or vibrations during application.
d) Prevent any damage to the bore
e) Avoid excessive loads on the grinding surface
f) Store discs flat or perpendicularly, keep them dry, protected from frost and at a constant
temperature.
g) Keep discs in their original packaging or in special packaging and on shelves, out of reach of
children.
6.5- Disposal
Do not dispose with household garbage. Do not throw into the environment.
Dispose of the tool in a collection centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.
- Proceed with disposal of remnants, the tool, accessories and packaging according to local
regulations regarding the protection of the environment
7- Warranty Information
The tool is guaranteed in accordance with the legislation of the country of purchase, starting from
the date on which the appliance is sold to the end user.
Page 27 of 45