Battery Pack Removal; Machine Operation; On/Off Switch; Automatic Carpet Height Adjustment - Tennant V-LWU-13B NA Manuel D'utilisation Et De Pièces

3. As the battery is discharged, during use, the
number of green lights showing will reduce from four
(4) to none (0).
4. When all of the green lights are off and only the
red light is showing, there is a small amount of time
remaining before the battery will be fully discharged
and will require recharging.

BATTERY PACK REMOVAL

NOTE:
Turn the vacuum off. If the battery charger
is plugged into the charge point on the vacuum,
remove the charger from the charge point before
removing the battery.
The battery can be removed and charged
independently from the vacuum.
To remove the battery push up on the release button
and lift the battery off.

MACHINE OPERATION

LOWERING THE HANDLE
Press the Handle Release Pedal located on the back
of the vacuum with your foot to lower the handle.
Tennant V-LWU-13B, (02-2021)

ON/OFF SWITCH

1. Turn the switch On to use the vacuum. If the
vacuum doesn't turn on, check that the battery is
charged.
2. Always unplug the charger from the Charge Point
before use.
AUTOMATIC CARPET HEIGHT
ADJUSTMENT
The vacuum is designed with an automatic self-
adjusting nozzle. No manual adjustments are
required. The height of the nozzle automatically
adjusts to the flooring surface. This self-adjusting
feature allows the nozzle to float evenly over all
flooring surfaces.

EDGE CLEANING

The edge cleaning feature provides improved
cleaning near walls and stationary furniture. For
maximum edge cleaning, place the left side of the
nozzle, from the user's perspective, against the wall
or stationary furniture.
English
EN
9