Piece-Counting Function; Tare Function - Gram K1 Manuel D'utilisation

Function 1. Press this key to turn on the indicator.
Function 2. To reset the weight to 0. The displayed weight value has to be less than +/-2% of
maximum capacity.
Function 3. To subtract the weight of a container and then obtain the net weight of product (Tare
function). The container´s weight must be higher than 2% of maximum capacity.
Function 1. To enter to piece-counting function.
Function 2. To change the parameters in setting parameter mode.
Function 1. To accumulate weights.
Function 2. To print data.

PIECE-COUNTING FUNCTION

1. Press the
2. Press again the
3. To select the sample value, press the
4. Put on the platform the selected number of pieces.
5. Press the
6. Display will show the number of pieces placed on platform.
7. Add the rest of pieces to be counted, the display will show the total number of pieces.
8. Press the
Note: The sample unit weight must be higher than 0,2d.

TARE FUNCTION

1. Place a container on the platform.
2. Press the
3. The balance will subtract the weight of container, display will show 0
4. Put the product to be weighed in the container.
5. Display will show the product´s weight (net weight)
key for 2 seconds, the display will show "0" "kg"
key, the display will show "C 10"
to confirm.
key for 2 seconds, the indicator will return to normal weighing mode.
key.
key
7