Piece Counting Function; Standard Calibrations - Gram CM Série Manuel D'utilisation

20 d.
• The screen will display the message U.--S.-- if the unit weight and sample
weigh are less than 0.2 and 20 d

PIECE COUNTING FUNCTION

1. Press the
2. If the scale has no previous sample count saved, it will display U.— for 2 seconds
and will activate counting functions. In this moment, please proceed to enter the
sample as it is described in the previous chapter.

STANDARD CALIBRATIONS

Press the and the
Calibrations.
ECF-1 Weight Calibration (Zero and Span)
ECF-2 Zero Calibration
ECF-3 Span Calibration
Weight Calibration ECF-1
1. Press the
to weighing mode.
2. The display will show CALZ, press the
3. Use ◄, ►, ▲, 0 ~ 9 keys to enter the calibration weight value and then confirm with
the key.
4. Place the required weight mass onto the scale as indicated on display and press
the to calibrate the scale.
5. The scale will complete the calibration automatically and will return back to
weighing mode.
Zero Calibration ECF-2
1. Press the
menu and return back to weighing mode.
2. The display will show CALZ, press the
3. The scale will complete the zero calibration automatically and will return back to
key to activate counting mode.
key in weighing mode to start Standard
key to start ECF-1 mode or the ESC key to exit menu and back
key to start Zero Calibration ECF-2 or the
key.
key.
key to exit the
8