Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. PRODUCT MAINTENANCE
Dust buid-up reduces light output performance and can cause overheating. To maintain optimun performance,
clean the produce at least twice a month. However, usage and environmental conditions contribute to
increasing the cleaning frequency.
To clean the produce, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum(or dry compressed air) and a soft brush to remove dust collected on the external surfaces and
fan vents.
4. Clean the glass panel(laser aperture) with a mild solution of glass cleaner or isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton or a lens cleaning tissue.
6. Softly wipe any dirt or grime to the outside edges of the glass.
7. Gently polish the glass surface until they are free of haze and lint
Always dry the glass surfaces carefully after cleaning them.
Do not spin the fan using compressed air because you could damage it.
Do not open this product for cleaning or servicing.
NICOLS is a registered trade mark of EXPELEC SA
74370 Charvonnex/ FRANCE – Tél : +33 (0)4 50 60 80 20/
www.expelec.fr
Publicité
Table des Matières
