Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT
Product introduction
This product is designed for indoor use. Suitable applications include wash or effect lighting for
architectural, stage or nightclub applications. This product can also be installed for use in signage
and advertising using the dynamic functions available with DMX512 control. Direct input of
DMX512 signal allows the units to be controlled from any DMX512 controller. This product can be
operated as a single unit or in multiple units for large applications.
Mounting:
-Hanging
The product can be mounted in a hanging position using the supporting bracket. The bracket
should be secured to the mounting truss or structure using a standard mounting clamp. Please
note that when hanging the unit a safety cable should also be used.
-Upright
The product can be mounted in an upright or sitting position using the supporting brackets.
-NOTE:
The product can be mounted at any angle and in any position. It is possible to further adjust the
angle of the product using the two adjustment knobs located on the side of the fixture.
For power supply, do not connect in series much more than 7 units, use
another mains supply for next 7 units.
TECHNICAL SPECIFICATIONS
Voltage: AC110-240V, 50/60Hz
Power consumption: 95W
Light Source: 18PCS *12W (RGBWA-UV 6in1 LED)
Lumens : 5300LUX@1M
DMX mode : 10
Control Mode: Auto, DMX, Master, Slave, Sound active
Beam angle : 40°
Dimmer: 0-100% / Strobe
Net Weight：2,3Kg
Size: 230x230x180mm
Publicité
Table des Matières
