Technical Data; Charging Characteristics - Milwaukee M18 ONESLDP Notice Originale

TECHNICAL DATA

BATTERY-LAMP
Lighting time with two fully charged battery (9.0 Ah)
Mode 3 High Level ...............................................................
Mode 2 Med Level ...............................................................
Mode 1 Low Level ...............................................................
Luminous fl ux
High Level ............................................................................
Med Level ............................................................................
Low Level ............................................................................
Colour rendering index (CRI)..................................................
Colour temperature.................................................................
AC-Mode
Voltage .................................................................................
Rated Output Voltage ..........................................................
Rated Output Current ..........................................................
Rated Power Input ...............................................................
DC-Mode
Rated Power Input ...............................................................
Battery voltage .....................................................................
Frequency band(s) of Bluetooth .............................................
Radio-frequeny power ............................................................
Bluetooth version ....................................................................
AC input ..................................................................................
Charger rated power input ......................................................
Charger output........................................................................
Quick charge current ..............................................................
Battery charging time with 5.0 Ah ...........................................
Battery charging time with 6.0 Ah ...........................................
Battery charging time with 9.0 Ah ...........................................
Weight without battery ............................................................
Weight according EPTA-Procedure 01/2003 (2.0 Ah) ............
Weight according EPTA-Procedure 01/2003 (5.0 Ah) ............
Weight according EPTA-Procedure 01/2003 (9.0 Ah) ............
Protection class ......................................................................
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
BATTERY LAMP SAFETY INSTRUCTIONS
WARNING Do not direct the light beam at persons or
animals and do not stare into the light beam yourself (not
even from a distance). Staring into the light beam may result
in serious injury or vision loss.
WARNING This device contains a lithium button/coin cell
battery. A new or used battery can cause severe internal
burns and lead to death in as little as 2 hours if swal lowed or
enters the body. Always secure the battery cover. If it does
not close securely, stop using the device, remove the
batteries, and keep it away from children. If you think
batteries may have been swallowed or entered the body,
seek immediate medical attention.
Caution – this product is provided with cooling openings in
the bottom enclosure. Only install this luminaire on a surface
that will not allow accumulation of water into the housing.
Keep the product away from puddles,etc.
20 ENGLISH
M18 ONESLDP
.............................................................. 3,5 h
.............................................................. 7,0 h
............................................................ 14,0 h
........................................................... 9000 lm
........................................................... 4800 lm
........................................................... 2500 lm
............................................................... 80
........................................................... 4000 K
...................................................... 110-240 V
.........................EU/DK/FR: 230 V, UK: 110 V
............................ EU/FR/UK: 16 A, DK: 13 A
............................................................. 190 W
............................................................... 81 W
............................................................... 18 V
.................................................. 2402-2480 MHz
.............................................................. 1,8 dBm
..................................... 4.0BT signal mode
.........................EU/DK/FR: 230 V, UK: 110 V
............................................................... 85 W
............................................................... 18 V
................................................................. 3 A
..............................................................115 min
............................................................. 135 min
............................................................. 195 min
.............................................................11,4 kg
.............................................................11,8 kg
............................................................ 12,1 kg
............................................................ 12,5 kg
....................................................IP40/IP54
CHARGER SAFETY INSTRUCTIONS
Do not store the battery pack together with metal objects
(short circuit risk).
Only the following battery packs can be charged with this
charger:
Battery Cat. Cell Type DC Volts Capacity
No.
M18B Li-Ion 18 ≤ 1.5 Ah
M18BX Li-Ion 18 ≤ 3.0 Ah
M18B2 Li-Ion 18 ≤ 2.0 Ah
M18B4 Li-Ion 18 ≤ 4.0 Ah
M18B5 Li-Ion 18 ≤ 5.0 Ah
M18B6 Li-Ion 18 ≤ 6.0 Ah
M18B9 Li-Ion 18 ≤ 9.0 Ah
Do not try to charge non-rechargeable batteries with this
charger.
No metal parts must be allowed to enter the battery section
of the charger (short circuit risk).
Never break open battery packs and chargers and store
only in dry rooms. Keep dry at all times.
Do not touch the tool with conducting objects.
Never charge a damaged battery pack. Replace by a new
one.
Before use check machine, cable, and plug for any
damages or material fatigue. Repairs should only be carried
out by authorised Service Agents.
This appliance is not intended to
be used or cleaned by persons
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless
they have been given instructions
concerning the safe use of the
appliance by a person legally
responsible for their safety. They
should be supervised whilst using
the appliance. Children shall not
use, clean or play with this
appliance, which when not in use
should be secured out of their
reach.
ADDITIONAL SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the
appliance.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors off er to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only compatible Milwaukee chargers from the same
battery platform for charging battery packs. Do not use
battery packs from other systems.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least 10
Cell No.
minutes and immediately seek medical attention.
5
Warning! To reduce the risk of fi re, personal injury, and
2 x 5
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or al-low a fl uid to fl ow
5
inside them. Corrosive or conductive fl uids, such as
2 x 5
seawater, certain industrial chemicals, and bleach or bleach
2 x 5
containing products, etc., Can cause a short circuit.
2 x 5
3 x 5
SPECIFIED CONDITIONS OF USE
The Battery-lamp is intended to be used light independent
use away from mains supply.
Additionally the charger can charge the specifi ed Milwaukee
battery packs.
Do not use this product in any other way as stated for
normal use.
EC-DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio
equipment type M18 ONESLDP is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://services.milwaukeetool.eu
ONE-KEY™
To learn more about the ONE-KEY functionality for this tool,
please reference the Quick Start guide included with this
product or go to www.milwaukeetool.com/one-key. To
download the ONE-KEY app, visit the App Store or Google
Play from your smart device.
We considered the results to be within our minimum
acceptable performance level according to EN 300 328 /
EN 55015 / EN 62479 / EN 61547 / EN 301489-1 /
EN 30149-17.
LI-ION BATTERIES
The rechargeable batteries are partially charged. The LED
on the battery indicates the state of charge.
If it is not used for long periods, the rechargeable battery will
switch to the non-operative state.
When fully discharged the rechargeable battery switches off
automatically (depth discharge not possible).
Under extreme circumstances, the internal temperature of
the battery could become to high. If this happens, the
battery will shut down.
Place the battery on the charger to charge and reset it.
The state of charge can be read by pressing the button on
the rechargeable battery. The battery can be left in the
electric tool while the reading is taken but it must be
switched off at least one minute beforehand (otherwise the
display will be inaccurate). The number of LEDs illuminated
indicates the state of charge. A fl ashing LED indicates a
max. power reserve of 10%.
As a general principle, if the electric tool should fail to work
after inserting the rechargeable battery, then the battery
should be plugged into the charger. The displays on the
battery and charger will then provide information about the
condition of the battery.
In low temperatures work may continue at reduced output.

CHARGING CHARACTERISTICS

After inserting the battery into the reception of the charger
the battery will automatically be charged (red control lamp is
illuminated continuously)
When a hot or cold battery pack is inserted into the charger
(fl ashing red lamp), charging will begin automatically once
the battery reaches the correct charging temperature
(0°C...60°C). The max. charging current is fl owing when the
temperature of the Li-Ion-battery is between 5°C and 40°C.
Charging time varies depending on the battery temperature,
charge needed and the type of battery pack being charged.
Once the battery is fully charged, the LED on the charger
changes from red to green.
Remove the battery pack from the tool for charging when
convenient for you and your job. Milwaukee batteries do not
develop a "memory" when charged after only a partial
discharge. It is not necessary to run down the battery pack
before placing it on the charger.
As a general practice, it is best to unplug battery chargers
and remove batteries when not in use. No battery pack
damage will occur, however, if the charger and battery pack
are left plugged in.
If the LED fl ashes alternately red/green, then the
rechargeable battery is either not fully pushed in or there is
a fault with the battery or charger. Take the charger and
ENGLISH 21