STEERING LOCK
The motorcycle comes with a steering lock located on
the ignition switch (1).
Lock the steering as follows:
Turn the handlebar to the left or to the right.
-
Insert key (2) into the ignition switch (1) to
-
Press the key (2) and turn it anticlockwise to
-
position.
Remove the key (2).
-
To unlock the steering, follow the above procedure in
-
reverse order.
20
EN -
FUSES
Fuse malfunction could cause problems to the
motorcycle.
To access the fuse box, remove the side locking devices
(1) and open the protective door (2).
Before operating on the fuses, set the ignition switch
position.
to
position and remove the key in order to prevent
short circuits.
CAUTION
Do not use fuses with a different capacity
from the original one.
Two fuses (8) are present under the rider seat, that
protect the battery charge generator and the charge
socket under the passenger seat, respectively.