Making A Call With The Headset - Doro CONGRESS 305 Manuel D'utilisation

English
Making a call using the Speakerphone
With speakerphone selected, calls can be made/received by pressing
1. Press . The speakerphone will be activated, the indicator light next to the
s
button will illuminate and dial tone will be heard.
2. Dial the required telephone number.
3. Speak towards the microphone located on the base unit. (Please refer to the
diagram on page 2, item number 7).
4. Press to terminate the call.
s
Please note!
Headset operation is not available if speakerphone has been selected.

Making a call with the headset

With Headset selected, calls can be made/received by pressing
1. Press . The indicator light next to the button will illuminate and dial tone
=
will be heard.
2. Dial the required telephone number.
3. Press to terminate the call.
=
Please note!
Speakerphone operation is not available if headset has been selected.
Pre-Dialling
You can dial a telephone number without lifting the handset or pressing
1. Dial the telephone number using the keypad, the number will be shown in
the display.
2. If an error is made, move the cursor by scrolling to the required digit. Press
to remove the digit and enter the correct number using the keypad.
C
3. Press . The speakerphone/headset function will be activated (depending
0
on which has been selected) and the displayed number will now be dialled.
Please note!
Pre-Dial will not work if Direct Dial has been selected.
8
Operation
.
S
.
=
/ .
s =
www.doro.com