Least Cost Routing (Lcr) - Doro CONGRESS 305 Manuel D'utilisation

English

Least Cost Routing (LCR)

Least Cost Routing (LCR)
This will allow automatic selection of the telephone network operator of your
choice. The telephone can be set up to add and/or replace certain digits in a
telephone number.
To select an alternate network operator, you would normally dial a prefix code
before the actual phone number.
Example:
You have chosen a network operator for international calls where you need
to dial 9301 before the international dialling code, you can set LCR to
automatically dial a number beginning with 00 as 930100.
Therefore the number 00 46 46 2805000 would automatically be dialled 930100
46 46 2805000.
Please note!
In order to place your call with a certain operator you must be a registered subscriber. A
maximum of four LCR set-ups can be active simultaneously.
Setting Up an LCR number
1. Press .
0
2. Scroll to SET MENU. Press
3. Scroll to LCR. Press
4. Scroll to one of the four settings ( 1 - 4 ). Press
5. Enter the dialling sequence to be replaced to the left (up to four digits,
e.g. 00). Use
6. Scroll to the right side of the display, enter the numbers to be added
(max 6, for example 930100). Press
Automatic network prex using LCR
If you want the LCR function to add a prefix in front of all telephone numbers,
leave the space to the left empty by scrolling to the right side and then enter the
network prefix required (maximum 6 digits).
16
.
0
.
0
to erase or change any details.
C
.
0
.
0
www.doro.com