System Settings - Doro CONGRESS 305 Manuel D'utilisation

Explanation of system settings
A qualified engineer or your system administrator must program the following
PBX system settings.
Recall time/function
You can select either TBR (3 settings) or ETH recall dependant on your system
requirements. Please contact your network provider for further information.
1. Press .
0
2. Scroll to SET MENU. Press
3. Scroll to RECALL. Press
4. Scroll to the required setting (
Tone/Pulse dialling
The dialling type (Tone or Pulse) can be selected to suit your network
requirements.
Initially select Tone, if you are unable to dial out reprogram for pulse dialling.
1. Press .
0
2. Scroll to SET MENU. Press
3. Scroll to TONE/PULSE. Press
4. Scroll to either TONE or PULSE. Press
Memory pause time
Some PBX's and telephone exchanges may require a pause in the dialling
sequence, the timing may be adjusted to suit individual requirements. Please
contact your network provider for further information.
1. Press .
0
2. Scroll to SET MENU. Press
3. Scroll to PAUSE. Press
4. Scroll to the required pause time (1, 3, 5 seconds). Press
www.doro.com

System Settings

.
0
.
0
,
98 270
.
0
.
0
.
0
.
0
, , EARTH). Press
600
.
0
.
0
English
.
0
17