CDVI CA-ETHR-A Manuel D'installation page 14

INSTALLATION MANUAL
CA-ETHR-A
TCP/IP Module
1) By default, the window displays the Network Settings tab. Make any necessary changes
and click Apply. If you do not click Apply, changes will not be saved when you change
tabs.
For more detailed explanations of the different settings and menus, refer to "Settings and Menus"
on page 19. When you click Apply, the module automatically resets, the Login window appears and
a list of what was changed appears.
2) Select the COM Settings tab and make any necessary changes. If you need to use the
5-pin serial connector (port 1) to connect the TCP/IP to the serial device (refer to
"Hardware Connections" on page 15, you can now select port 1. Click Apply.
3) Select the Security tab, make any necessary changes, and click Apply.
4) Select the Admin tab. In the Password text box, type your password and click Apply.
5) When you are done, click Logout.
6) Close your Web browser.
cdvi.com
14
cdvigroup.com