Appendix A: Specifications; A-1. General Specifications - Star TSP2000 Série Mode D'emploi

A-1. General Specifications

(1) Printing method
(2) Print speed
(3) Dot density
(4) Number of print columns
(5) Roll paper
(6) Bar codes
(7) Sensor
(8) Overall dimension
(9) Weight
Print Area
1
Note * Since the firmware automatically feeds the paper 5 mm after it is cut,
the top cutter margin becomes 24.6±1.

Appendix A: Specifications

Direct line thermal printing
Max. 75 mm/s
203 dpi: 8 dots/mm (0.125 mm/dot)
48 (12 × 24 dots)
64 (9 × 24 dots): ESC/POS mode only
Refer to chapter 2 for details on the recommended
roll paper.
Paper width: 80
Roll diameter: ø90 mm or less
External diameter of core: ø18
Internal diameter of core: ø12 ± 0.5 mm
UPC-A, UPC-E, JAN 13 (EAN), JAN 8 (EAN),
CODE 39, CODE 93, CODE 128, ITF, CODA BAR
Paper end, cover open, paper near end, abnormal
print head temperature
144 (W) × 195 (D) × 138 (H) (mm)
Approx. 1.48 kg
1 to 2
1 576
4±1 72±0.2
Print area
0
80
-1
Paper width
0.125
576 dots
Print area 72±0.2
– 87 –
0
mm
- 1.0
+0.5
Cutter position
Print head
4±1
printing position
Unit : mm
mm
0