Sharpening The Blades; Maintenance; Storage And Transportation - TOOLCRAFT 1619740 Notice Originale

• Press the on/off switch (4) briefly to evenly distribute the resin solvent
• Wipe the surface with a dry cloth afterwards.
b) Sharpening the blades
Warning! Risk of cuts! Wear protective gloves before/while sharpening the blade.
1. Ensure the cutter blades and the shear plate are slightly offset.
2. Secure the blade in a vice.
3. Align the mill file (not provided Conrad, Item No. 829674) along the same angle as the edge of the tooth and make
several, long, smooth strokes downward of each blade. The tooth edges should shine up as the file removes build-
up and oxidation. Ensure that the original angle of each tooth is maintained (Fig. 13).
Fig. 13
4. Repeat the procedure for the remaining teeth.
c) Maintenance
To ensure long and reliable service, carry out the following maintenance regularly.
• Regularly check for obvious defects such as loose fixings, and worn or damaged components.
• Check that covers and guards are undamaged and correctly fitted. Carry out necessary maintenance or repairs
before using.

11. Storage and transportation

• Always lubricate the blades with a lightweight machine oil (not provided, Conrad Item No. 236217) before storage.
• Place the blade covers on the blades before storing and transportation.
• Store the product indoors, in a dry place inaccessible to children.
• Charge the battery pack (3) at least once every three months to protect it from deep discharge and damage.
• Transport the product adequately secured in original packaging.
36
Shear plate
Cutter blade