Adjusting The Handle Angle; Lubricating The Blades - TOOLCRAFT 1619740 Notice Originale

c) Adjusting the handle angle
1. Pull the handle adjustment slider (1) and rotate the
handle to one of 4 handle positions (Fig. 6).
2. Release the handle adjustment slider (1) and make
sure the handle is locked in place before operating the
product.
Refer to section 8 for appropriate handle
adjustment angle tips.
d) Lubricating the blades
For best results lubricate the blades before and
after each use.
1. Apply a lightweight machine oil (not provided, Conrad
Item No. 236217) along the upper edges of the blade
(Fig. 7).
2. Remove any excess of oil with a dry cloth.
Fig. 6
90°
Fig. 7
0°
-90°
180°
31