Changing The Blade - TOOLCRAFT 1619740 Notice Originale

b) Changing the blade
Warning! Risk of injury! Remove the battery pack (3) from the battery compartment before changing the
blades.
1. Pull the locking hook (5) up and then pull the blade cover (6) backwards (Fig. 3).
2. Pull the blade cover (6) up (Fig. 4).
3. Remove the installed blade.
Fig. 3
4. Place the replacement blade on the product (Fig. 5).
5. Reinstall the blade cover (6) in a reverse order. Make sure it clicks in place and that the blade is secured.
30
Fig. 5
Fig. 4