Door Reversibility - Electrolux EN2400AOW Manuel D'utilisation

72 www.electrolux.com
9.4 Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.

9.5 Door reversibility

The side at which the door opens can be
changed from the right side (as supplied)
to the left side, if the installation site
requires. Tools you will need:
1. 8mm socket driver
2. cross-shaped screwdriver
3. Putty knife or thin-blade screwdriver
Before you start lay the refrigerator on it's
back in order to gain access to the base,
you should rest it on soft foam packaging
or similar material to avoid damaging the
cooling pipes at the rear of the refrigerator.
02 12 2013_Electrolux -Rex UM_1.indb 72
4. Stand the refrigerator, open the
upper door and remove the door
shelves and close it(preventing the
shelves are damaged ).
5. Unscrew the screw with a cross-shaped
screwdriver,then Usea a putty knife or thin-
blade screwdriver to prize the screw hole
cover which is at the top left corner of the
refrigerator, and Unscrew the upper hinge
cover which is at the top right corner of
the refrigerator.
6. Unscrew the special lange self-tapping
screws which are used for ixing the right
upper hinge part by a 8mm socket driver
or a spanner (please support the upper
door with your hand when doing it ).
2015-09-22 15:39:56