Electrolux EN2400AOW Manuel D'utilisation page 71

7. Remove the upper hinge axis, transfer
it to reversed side and tighten securely,
then put it in a safe place.
8. Lift the upper door and set it on a non
scratching surface with the outside up.
NOTE: When removing the door, watch for
washer(s) between the ceter hinge and the
bottom of the freezer door that may stick
to the door. Do not lose.
9. Unscrew the two special lange
self-tapping screws which are used
for ixing the middle hinge part, then
remove the middle hinge part that
hold the lower door in place.
10. Lift the lower door and set it on a non
scratching surface with the outside up.
NOTE: When removing the door, watch for
washer(s) between the ceter hinge and the
bottom of the freezer door that may stick
to. the door. Do not lose.
02 12 2013_Electrolux -Rex UM_1.indb 73
11. Remove the screw hole cover from the
left holes as illustrated and transfer them
to the uncover holes at the right side.
12. Lay the refrigerator on soft foam
packaging or similar material. Remove
both adjustable bottom feet parts, and
remove the front feet ixed board and
the lower hinge part by unscrewing the
special lange self-tapping screws.
13. Unscrew the bottom hinge axis and
remove it to the hole which is side-by-
side and screw it.
ENGLISH 73
2015-09-22 15:39:57