brennenstuhl ML DN 2806 S IP54 Mode D'emploi page 7

SMD LED Light
MaINTENaNcE:
PLEASE NOTE: The LED light does not contain parts that need servicing.
The LED light source cannot be replaced. If necessary, replace the entire light.
Never open the lamp when the mains supply cable is connected.
risk of life due to electric shock!
cLEaNING:
Do not use solvents, corrosive cleaners or the like.
Use a dry or slightly moist cloth for cleaning only.
DISPOSaL:
Dispose of electrical devices in an environmentally responsible manner!
Do not dispose of electrical devices with household rubbish!
In accordance with European Directive 2012/19/EU regarding electrical and electronic
devices must be collected separately and sent in for recycling.
Please contact your local authorities for available disposal options for your worn-out device.
addresses
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles · F-67170 Bernolsheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
www.brennenstuhl.com
BA_SMD_LED-Leuchte_ 0487226_240707.indd 7
Operating Instructions
D
7
24.07.15 13:46