Removing And Replacing The Oven Door And Drawer - LG LRG3085ST Manuel D'utilisation

34
CARE AND CLEANING
Removing and Replacing the
Oven Door and Drawer
CAUTION
• The door is very heavy. Be careful when removing and
lifting the door.
• DO NOT lift the door by the handle.
• DO NOT hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring or stressing the glass may
weaken its structure, causing an increased risk of
breakage at a later time.
Removing the Oven Door
1. F
ully open the door. Pull the hinge locks away from the
oven interior, until they are fully unlocked. A tool, such as
a small flat-blade screwdriver, may be required.
Slot
Hinge lock
Push hinge locks up to unlock
2. Firmly grasp both sides of the door at the top.
Close the door to the removal position (approximately five
degrees from fully closed).
About 5°
Removal Position
3. Lift the door up and out until the hinge arm is clear of the
slot. Put the door on the floor.
Replacing the Oven Door
1. Firmly grasp both sides of the door at the top.
Hinge arm
2. With the door at the same angle as the removal position,
seat the indentation of the hinge arm into the bottom
edge of the hinge slot. The notch in the hinge arm must
be fully seated into the bottom of the slot.
Hinge arm
Door frame
3. Fully open the door. If the door will not fully open, the
indentation is not seated correctly in the bottom edge of
the slot.
4. Push the hinge locks down toward the bottom of the door
to the locked position. Close the oven door.
Bottom edge of slot
Indentation
Slot
Push hinge locks down to lock
Hinge lock
Hinge arm
Door frame