Fault Reference Code; Warning Indicator - INFOSEC G1 Manuel Utilisateur

Fault Reference Code

Fault Code
01 Fan is locked when inverter is off.
02 Over temperature
03 Battery voltage is too high
Output short circuited or over temperature is detected by internal
05
converter components.
06 Output voltage is too high.
07 Overload time out
08 Bus voltage is too high
09 Bus soft start failed
51 Over current or surge
52 Bus voltage is too low
53 Inverter soft start failed
55 Over DC voltage in AC output
56 Battery connection is open
57 Current sensor failed
58 Output voltage is too low

Warning Indicator

Warning Event
Fan is locked when
inverter is on.
Battery is over-charged
Low battery
Overload
20
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 08 18 AA 59 203 14
Fault Event
Audible Alarm
Beep three times every
second
Beep once every second
Beep once every second
Beep once every 0.5 second
Icon on
Icon flashing