Dry Contact Signal - INFOSEC G1 Manuel Utilisateur

instruction to install the monitoring software. For the detailed software operation, please check user manual of
software in the CD.

Dry Contact Signal

There is one dry contact (3A/250VAC) available on the rear panel. It could be used to deliver signal to connect
external device based on different working mode.
Unit Status
Power Off Unit is off and no output is powered.
Output is powered from Utility.
Power On
Output is powered from Battery.
12
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 08 18 AA 59 203 14
Condition
Dry contact port:
NC & C NO & C
Close Open
Close Open
Open Close