Recording To A Cassette Tape From A Cd - Sharp CD-CH1500W Mode D'emploi

Recording to a Cassette Tape from a CD

" When recording important selections, make a preliminary test to ensure that the
desired material is properly recorded.
" SHARP is not liable for damage or loss of your recording arising from malfunction
of this unit.
" The volume and sound controls can be adjusted with no effect on the recorded
signal (Variable Sound Monitor).
" Do not use metal or CrO tapes for recording.
You can record the desired CD using the DISC 1 - DISC 6 buttons.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button and load the desired disc.
3
Load a cassette into the compartment with side A facing you.
4
Press the REVERSE MODE button to choose one side or both
sides.
... To record on both sides.
... To record on only one side.
5
Press the REC PAUSE button repeatedly to switch to the side
you record on.
" Recording will be paused.
" To record on both sides, begin on side A. (If recording is started from side B, the
tape will not switch over to side A.)
6
Press one of the DISC 1 - DISC 6 buttons to start recording.
" When the CD reaches the end, recording will stop.
Recording from several CDs continuously:
1 Follow the above steps 1 - 5.
2 Regardless of the setting in step 5, press the
button for side B.
" Recording will start from the disc of the lowest number.
To perform programmed recording:
1 Programme discs and tracks. (See page 20.)
2 Press the REC PAUSE button.
3 Regardless of the setting in step 5, press the
button for side B.
To stop recording:
Press the button.
The CD and tape will stop.
Auto restart function:
If the recording side is switched from side A to B during recording, the system will
record the interrupted track on side B from its beginning. The recording will be made
without cutting the beginning of the track on side B.
Programmed Play (See page 20.)
01/1/25 E2.fm
button to record on side A, or the
button to record on side A, or the
ENGLISH E-24