General Control; Demonstration Mode - Sharp CD-CH1500W Mode D'emploi

General Control

! Demonstration mode

The first time the unit is plugged, the unit will enter the demonstration mode. You will
see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the DEMO
button. The unit will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the DEMO button again.
! Opening and closing the control panel
The control panel is motorised.
The control panel automatically opens when the power is turned on, and closes when
the unit is set to the power stand-by mode.
When the power is turned on, you can open or close the control panel by pressing the
control panel open/close button.
Caution:
" Do not push the control panel whilst it is opening or closing.
" Do not press buttons on the control panel strongly. The hinge of the panel may be
broken.
" Be careful not to jam your fingers in the control panel.
! Display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button.
Dimmer off Dimmer on
ENGLISH E-14
01/1/25 E2.fm