Adjusting The Backrest; Adjusting The Headrest - Vermeiren Mercurius 4 LTD Manuel D'utilisation

Placing and locking the seat into place
1. Pull the seat lever upwards.
2. Place the seat on the adjustment bar and, at the same time, keep the seat lever pressed in.
3. Release the seat lever.
4. Make sure that the seat is firmly secured.
Swivelling the seat
1. Pull the seat lever upwards.
2. Turn the seat in the desired direction.
3. Release the seat lever. The seat will always stop after 90°.
4. Make sure that the seat is firmly secured.
Depth adjustment

3.5.3 Adjusting the backrest

1 = Seat system
2 = Tilt lever
1

3.5.4 Adjusting the headrest:

1. Gently press the locking pin (1) toward the headrest.
2. Move the headrest to the desired height.
3. Let go of the locking pin (1).
4. The headrest audibly locks into place.
1. Pull the seat depth adjustment lever upwards.
2. Move the seat forward or backward over the seat depth rails.
3. To lock the seat in place, let go of the lever once the seat has
reached the desired position.
4. Swivel the seat a little until it locks in position.
5. Make sure that the seat is locked securely.
A tilt lever (2) has been added to the side of the
backrest (transition to seat upholstery). Pull this lever
upwards to release the backrest and fold the
backrest forward (-75°), or adjust the angle of the
backrest (0°-22°).
2
1
1 = Locking pin
13
EN
Mercurius 4 LTD
2020-10
Using your scooter
NL