Storch HotFlow 55 Mode D'emploi page 35

WARNING !
Please observe the safety precautions for your airless unit
The device possesses a voltage range which can pose an electrical hazard to humans and animals. This should only be
screwed and / or disassembled by authorised personnel. Similarly, maintenance and repair work should only be con-
ducted by electrical specialists and authorised service centres. The buyer / user operates the device at their own risk and
under their own responsibility.
1. It should always be ensured that the heating hose is earthed.
The system is not explosion-proof. Exercise caution when using flammable material.
2. Before conducting any operation the following points must be observed in accordance with the manual:
1) Faulty equipment should not be used.
2) Make sure the unit is earthed.
3) Check the permissible operating pressure on the airless unit.
4) Check all connecting parts for leaks.
5) Wear personal protective equipment.
6) The HotFlow 55 7.5 m heating hose system (art. no. 69 15 05) is suitable for STORCH Airless equipment as of date
of manufacture 10/2011.
3. Instructions relating to regular cleaning and maintenance of the unit must be observed!
Before starting any work on the unit or having a break from work observe the following rules:
a) Discharge pressure (spray gun and airless hose).
b) Secure the spray gun by applying the safety lever to the trigger.
c) Switch off the unit.
Pay attention to your safety!
1. Safety regulations for paint spraying
The safety precautions provided by the manufacturer of your airless unit are to be observed for safe operation of airless
spraying equipment.
The following additional safety regulations must observed when operating the heating hose described in this document:
35 Translation of the original instruction