T He Fu Nc Tion Bu Ttons - SOLIS TWIST AIR 7220 Mode D'emploi

AP P LIA NC E D E S C RI PT I O N
s
LIGHT SLEEP AUTO TURBO
ON/OFF FILTER RESET
GB
D
80
A
B
C
G H
E
Control panel with touch sensitive
A
buttons and function lights
Motor unit with air outlet grille,
B
fan and LED illumination
Positioning ring for float gauge
C
Float gauge
D
Humidification mat
E
F
Appliance base with inlying water
F
basin, water level indicator and air
intake grille
Connection jack
G
Power adapter
H

T HE FU NC TION BU TTONS

s
ON/OFF button
Button for switching the appliance on
and off. As soon as you have switched
the appliance on, it starts working at
the medium humidification level. The
LED night light in the motor unit lights
up, switching between 7 colours. The
function lights for ON/OFF, LIGHT and
II light up in blue (standard setting).
Button for night light
and sleep mode
With this button, you can either set a
permanent LED colour or activate the
sleep mode.
One touch: If you touch the button
once, the function light at LIGHT flash-
es 3 times and the currently visible LED
colour remains constant.
Two touches: If you touch the button
twice, the SLEEP function light flashes
10 times and the appliance switches
to sleep mode: Humidification is at the
lowest level, all lights go out.
Three touches: If you touch the button
a third time, the sleep mode is deacti-
vated and the appliance is working at
the low humidification level. No LEDs
are lit on the motor unit. The function
lights for ON/OFF and low (I) light up
in blue.
Four touches: If you touch the button
a fourth time, the LED light in the motor
unit lights up, switching between 7
colours, the appliance is working at the
low humidification level. The function
lights for ON/OFF, LIGHT and low (I)
light up in blue.
Button for automatic mode
With this button, you can activate the
automatic mode. The LED light in the
motor unit lights up either in red, blue
or orange to indicate the current humid-
ity. The current fan speed and humidifi-
cation output are displayed accordingly:
0 – 45 % humidity: the fan works at
high speed, the humidification level
is high, the LED lights up red.
45 – 65 % humidity: the fan works at
medium speed, the humidification
level is medium, the LED lights up
blue.
More than 65 % humidity: the fan
works at low speed, the humidifica-
tion level is low, the LED lights up
orange.
Button for fan speed
With this button, you can manually
adjust the fan speed and thus the humid-
ification level. With each touch of the
button, the appliance switches to the
next level, the corresponding function
light lights up. You can choose between
four speed settings:
Low (I) – Medium (II) – High (III) – Turbo
(all three function lights are lit)
81
GB