After Use - SOLIS TWIST AIR 7220 Mode D'emploi

A DJUSTI NG TH E AU TOMATIC MO DE
With the button, you can adjust the automatic mode. The LED light in the
●
motor unit lights up either in red, blue or orange, depending on the current
room air humidity. Depending on the humidity of the room, the unit automati-
cally adjusts the current ventilation speed resp. humidification output.
The LED light glows red: The room air humidity is between 0 and 45 %, so the
●
fan operates at high speed and the humidification level is high.
The LED light glows blue: The room air humidity is between 45 and 65 %, so
●
the fan operates at medium speed and the humidification level is medium.
GB
The LED light glows orange: The room air humidity is above 65 %, so the fan
●
works at low speed, the humidification level is low.
If you touch the button again, the automatic mode is switched off and the
●
appliance operates in manual mode. The LED light in the motor unit is switched off.
A DJUSTI NG VE N TILATION S PE ED
Use the button to adjust the ventilation speed and thus the humidification
●
level. Each touch of the button switches the appliance to the next level, the
corresponding function light lights up. You can choose between four speed
settings:
Low (I) – Medium (II) – High (III) – Turbo (all three function lights illuminate)
●
If you touch the button again after the "Turbo" setting has been selected,
●
the appliance returns to the low setting (I).
As a general rule: The higher the ventilation speed, the more intensive the
●
humidification will be.
S ETTIN G THE S LE EP MOD E AN D ADJUSTING TH E LIGH T
C OL OUR FOR TH E N IG HT LIGHT
You can use the button to either select a LED color to be permanently used
●
or to activate the sleep mode.
One touch: If you touch the button once, the function light at LIGHT will flash
●
3 times and the currently lit LED colour will be selected for constant illumination.
Two touches: If you touch the button twice, the SLEEP function light flashes 10
●
times and the appliance switches to sleep mode: humidification and ventilation
are at the lowest level, all lights go out.
Three touches: If you touch the button a third time, the sleep mode is deacti-
●
vated and the appliance is working at the low humidification level. No LEDs are
lit on the motor unit. The function lights for ON/OFF and low (I) light up in blue.
Four touches: If you touch the button a fourth time, the LED light in the motor
●
unit lights up, switching between 7 colours, the appliance is working at the low
humidification level. The function lights for ON/OFF, LIGHT and low (I) light up
in blue.
84
Note: If you previously were in automatic mode or in manual mode without
●
light and now want to set the light colour, touch the
to standard mode where all 7 LED lights will alternately light up. If you then
touch the button one more time, the LED colour that is currently lit remains
constantly lit. Touch the button again to enter sleep mode.

AFTER USE

s
If you want to switch the appliance off completely, always touch the ON/OFF
●
;
button first, pull the power plug from the power socket and disconnect the
connection plug from the appliance.
If you do not want to use the appliance for more than 2 days, we recommend
●
pouring the water out of the water basin and drying the water basin with a dry
towel as well as leaving the appliance open to air dry the humidification mat.
In general, we recommend pouring the water remaining in the water
●
basin away before filling new water.
"L OW WATER LEVEL I N WA TER BASI N" NO TIFI CA TI ON
If the water level in the water basin is too low, the function light next to ON/
●
OFF lights up in red. The fan remains in operation for a few hours to dry the
humidification mat. After that, the appliance stops automatically.
In normal mode resp. automatic mode, the fan remains in operation for another
●
7 hours to dry the humidification mat, the function light next to ON/OFF
switches from blue to red and flashes during the process. After the 7 hours
have elapsed, the fan stops automatically, but the function light next to ON/
OFF still flashes red.
In SLEEP mode, the fan remains in operation for another 10 hours to dry the
●
humidification mat, the function light next to ON/OFF lights up red. After the
10 hours have elapsed, the fan stops automatically, but the function light next
to ON/OFF remains red.
DAILY / W EEKLY CA RE O F Y OUR
s
AI R HU MIDI FIER
1. Change the water in the water basin every day. Only use fresh tap water without
any additives.
2. Clean the humidification mat and the water basin every week.
3. Should you not use the air humidifier for more than 2 days, we recommend
pouring the water out of the water basin and leaving the appliance open.
4. Should you not want to use your appliance for prolonged periods of time, please
clean and dry all parts carefully and store the air humidifier in the original pack-
aging in a dry room.
button once to return
GB
85