Electrical Connection - U.s.a. Only - KitchenAid KERCS807SSS0 Instructions D'installation

10. Move range into its final position making sure rear leveling leg
slides into anti-tip bracket.
11. Continue installing your range using the following installation
instructions.

Electrical Connection - U.S.A. Only

Power Supply Cord
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Direct Wire
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Disconnect power.
2. Remove the terminal block cover screws located on the back
of the range. Pull cover down and toward you to remove
cover.
A. Hold-down screws
B. Terminal block cover
3. Add strain relief.
Style 1: Power supply cord strain relief
■ Remove the knockout for the 40-amp supply cord.
■ Assemble a UL listed strain relief in the opening.
A. UL listed strain relief
■
Feed the power supply cord behind the black horizontal
cross brace and through the strain relief, allowing enough
slack to easily attach the wiring to the terminal block.
A. Black horizontal cross brace
B. Power supply cord
■ Tighten strain relief screw against the power supply cord.
A
B
A
A
B
9