Use; Charging The Battery Pack; Cleaning; Maintenance And Storage - Parkside PDSLG 20 A1 Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
ATTENTION!
This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3.
An up-to-date battery compatibility list can
be found at www.lidl.de/akku.
WARNING!
To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or
a similarly qualified person.

Use

Charging the battery pack

CAUTION!
Always unplug the appliance before you
remove a battery pack from or connect a
battery pack to the dual high-speed charger.
NOTE
Never charge the battery pack at an ambient
temperature of below 10°C or above 40°C.
If a lithium-ion battery is going to be stored
for an extended period, the charge level must
be checked at regular intervals. The optimum
charge level is between 50% and 80%. The
storage climate should be cool and dry, and
the ambient temperature should be between
0°C and 50°C.
Slide one or two battery packs into the dual
high-speed charger
Insert the power plug into the socket.
The charge level of the respective battery pack is
indicated by the corresponding LEDs
and the adjacent illustrations:
LED 1
flashes: The battery pack is
empty
.
GB │ IE
4 
.
/ /
LED 2
flashes: The battery pack is 1/3
charged.
LED 3
flashes: The battery pack is 2/3
charged.
All LEDs
/ /
battery pack is fully charged.
ATTENTION!
If all of the LEDs
the battery pack has overheated and cannot
be charged.
When charging is complete, disconnect the
dual high-speed charger
and remove the respective battery packs.
You should always switch the dual high-speed
charger
off for at least 15 minutes between
successive charging processes. To do this,
disconnect the power plug from the mains
power socket.

Cleaning

CAUTION!
Always unplug the charger before cleaning it.
Do not clean the charger with water.
Clean the appliance with a dry or slightly
moistened cloth.

Maintenance and storage

If you do not intend to use the appliance for
an extended period, remove the batteries and
store it in a clean, dry place away from direct
sunlight.
If a lithium-ion battery is going to be stored
for an extended period, the charge level must
be checked at regular intervals. The optimum
charge level is between 50% and 80%. The
optimum storage environment is cool and dry.
light up permanently: The
/ /
flash, this means
from the mains
PDSLG 20 A1

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

X20v team série

Table des Matières