Rj9 Relay Connector - shelyak SENTINEL PF0007 Guide Utilisateur

RJ9 relay connector

Your Sentinel's relay is connected to the RJ9 of the interface box to manage urgent closure of your
equipement.
Sentinel – User Guide (Français / English) – DC0011C
Pins 2 (black) & 4 (green) are connected to the relay. When
connected by Sentinel, the equipement should be closed.
When connected Dome Tracker, pin 4 received 12V from Dome
Tracker unit. When Sentinel close the relay, Dome Tracker
understand it should close the dome or the roll roof.
Pin 1 (red) is connected to Sentinel Ground.
Pin 3 (yellow) is not connected.
Be careful as numbering on the connector is not sequential!
Be careful as colors may vary depending on cable supplier.
*** END OF DOCUMENT ***
61 / 61