Installation; Part List; Sentinel Module And Wind Sensor - shelyak SENTINEL PF0007 Guide Utilisateur

2.4 - Installation

Part list

Without special order from your part, you should have received:
1. external Sentinel module
2. four sticks to protect your Sentinel from birds (install them on your module)
3. holder for the external module and associated screws
4. external wind sensor
5. 25m cable
6. interface module
7. serial cable (some Serial/USB adapters can be used directly)
8. Dome Tracker interface cable (optional)
9. power supply 110-220V/12V, 2A, 2.5*5.5mm
Parts 1-4 are setup outside, parts 6-9 inside; they are connected by the 25m cable [5].

Sentinel module and wind sensor

On image above, you can see from left to right:
4-20mA connector for an optional sensor
●
standard wind sensor RJ connector
●
25m cable connector toward interface module(selon commande) vers le boîtier d'interface
●
Sentinel – User Guide (Français / English) – DC0011C 36 / 61