shelyak SENTINEL PF0007 Guide Utilisateur page 54

Decoding this sequence is done as described:
Data
Data0 Major firmware version
Data1 Minor firmware version
Data2 Pointer to EEPROM save
point (high value)
Data3 Pointer to EEPROM save
point (medium value)
Data4 Pointer to EEPROM save
point (low value)
Data5 EEPROM overflow flag
Data6 Time (low value)
Data7 Time (high value)
Data8 Time
value)
Data9 Time since boot
Data10 Time since boot
Data11 Time since boot
(1): This means Sentinel was left alone too long before conecting the PC and downloading the data
or hat the EEPROM recording time step is too short.
Sentinel – User Guide (Français / English) – DC0011C
Description
since boot (high
Type
Byte In
version is 2.4
Byte
LongWord24 Pointer where is the last saving
in the EEPROM.
Value between 0 and 131071,
multiple of 17.
Byte If
means memory did overflow of
the 7710 available slots. The
flag indicates number of times
it overflowed (1).
Word16 Current recording interval in
seconds. In the exemple: 0x3C
+ 0x00 * 255 = 60 secondes
LongWord32 Time since controler boot in
seconds.
Comments
the exemple,
different than
firmware
zero, this
54 / 61