Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.12 - Technical Informations
DB9 F/F cable (reference SE0062)
SE0062 cable is connecting the Sentinel head to the interface box. It provides power to Sentinel,
RS232 connection, relay position.... It is a 25m cable with DB9 female connectors on each side.
Cable is a 10x0,25mm2, with protective casing.
Connector are mettalic and can be open:
Connectors are connected pin to pin (straight connection) with 1A power through pin 1 & 6 (ground)
and 5 (12V). Pin 1+6 are connected to the proctive ground casing. On pin 5, three wires are
soldered.
Here is the normal color coding that is used; but it may vary depending on actual supplier:
See associated pictures :
If you open the cable, make sure you put the cover back and water proof. Use the right fixing ring
for this.
Sentinel – User Guide (Français / English) – DC0011C
1
Ground
2
Purple
3
Orange
4
Red
5
White + Yellow + Brown
6
Ground
7
Pink
8
Green
9
Blue
60 / 61
Publicité
Table des Matières
