Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Threshold transmitter does
not appear to work.
Barrier area range is too low.
Barrier area range is too high.
Troubleshooting
• Press the mode button and verify that the green LED light turns on when the button is pressed.
Check that the low battery light is not flashing red.
• Check/replace the batteries in the threshold transmitter and the receiver collar.
• Move the receiver collar closer to the transmitter to test the operation.
• If you hold the mode button for longer than 5 seconds, the transmitter will turn off.
• Check/replace the batteries in the receiver collar and the transmitter.
• Adjust the threshold transmitter level to increase the barrier area size.
• Adjust the threshold transmitter level to decrease the barrier area size.
www.petsafe.net
21
Publicité
Chapitres
Table des Matières
Dépannage
