JVC KENWOOD KMM-BT518HD Mode D'emploi page 26

BLUETOOTH®
Bluetooth test mode
You can check the connectivity of the supported
profile between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears.
2 Search and select this unit model name
(KMM-BT51*HD/KMM-BT31*U/KMM-BT31*/
KMR-M31*BT) on the Bluetooth device.
3
Operate the Bluetooth device to confirm
pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after
the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile
(A2DP) compatibility
PB DL: Phonebook Access profile (PBAP)
compatibility
To cancel test mode, press and hold
off the unit.
22 ENGLISH
BLUETOOTH — Audio
While in BT AUDIO source, you
can connect to five Bluetooth
audio devices and switch
between these five devices.
Audio player via Bluetooth
1 Press repeatedly (or press SRC on the remote control) to select BT AUDIO.
2 Operate the Bluetooth audio player to start playback.
To
Playback/pause
Select group or folder
Reverse/Forward skip
Reverse/Fast-forward
Repeat play
to turn
Random play
Select a file from a
folder/list
Switch between
connected Bluetooth
audio device
* Pressing the "Play" key on the connected device itself also causes switching of sound output from the device.
Operations and display indications may differ according to their availability on the connected
device.
On the faceplate
Press .
Press J / K.
Press S / T.
Press and hold S / T.
Press repeatedly.
ALL REPEAT, FILE REPEAT, REPEAT OFF
Press and hold to select
ALL RANDOM.
• Press to select RANDOM OFF.
Refer to "Select a file from a folder/
list" on page 10.
Press 5.*
On the remote control
Press .
Press / .
Press S /
.
Press and hold S / .
( Not available )
( Not available )
( Not available )
( Not available )