Basics; Faceplate - JVC KENWOOD KMM-BT518HD Mode D'emploi

BASICS

Faceplate

Detach button
Volume
knob
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information*
* 1
For : The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
* 2
For : You can also turn off the display information by pressing DISP repeatedly.
Lights up when Bluetooth
Display connection is established.
window ( 17)
:
USB cable from the
rear of the unit.
How to reset
On the faceplate
Press .
• Press and hold to turn off the power. *
Turn the volume knob.
Press repeatedly.
2
Press DISP repeatedly. ( 32)
Remote control (RC-406)
Flashes when
the unit enters
controlled with an optionally purchased remote control.
searching status.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
1 ( Pressing SRC does not turn on the power. )
Press
• Press and hold
volume to 15.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
(supplied for
Remote sensor (Do not expose to
bright sunlight.)
Pull out the insulation
sheet when using for the
first time.
/ : Can be remotely
: Remote control functions are not available.
or .
to continuously increase the
ENGLISH
)
3