Wall-Mounted Sound Bar - Medion LIFE E64058 Mode D'emploi

4. Stick the rubber pads to the underside of the sound bar as illustrated
above.
5. Place the sound bar on a firm, even surface near a plug socket.

7.3. Wall-mounted sound bar

wires.
− Choose a suitable location to install the product and take care
not to damage any concealed electric or wiring cables when
drilling.
1. Remove the two screws at each end
of the sound bar.
2. Screw the two wall mountings on
the ends of the sound bar with the
screws which you have just removed.
3. Drill two parallel holes in the wall (Ø
3-8 mm depending on the type of
wall), allowing a distance of 744 mm
between the holes.
First connect the two loudspeakers as shown in
section "7.2. Horizontal sound bar".
WARNING
Risk of injury from electric
shock!
There is a risk of electric shock from live
a
b
c
DE
FR
NL
EN
93 of 104