Maintenance Of The Appliance - Maxspect Turbine Duo Mode D'emploi

Maintenance of the Appliance

Your Turbine Duo DC Pump is designed to operate optimally with little attention after initial
English
setup. However, due to the harsh conditions of a saltwater aquarium and resulting buildup of
algae and other organic matter, it is advisable to clean the pump to ensure the longevity of
appliance. Maxspect recommends doing a cleaning every 6 months or as necessary. This can
be accomplished by opening the impeller housing and gently brushing the impeller and inside
of impeller housing with a soft brush under running water. If there is calcium buildup, it may
be necessary to soak these parts in a mild acid solution such as vinegar. Do not use strong
acids, because these may damage the components. After cleaning, reassemble the appliance.
15A. Impeller Housing(A)
17B. Impeller(B)
21. Bearing
25. Stator
6
Regular Pump Unit Maintenance
15B. Impeller Housing(B)
18. Sillicon Seal
22. Ceramic Bearing
26. Nut
16. Screw
19. Rotor Cover
23. Sillicon Pad
27. Pump Base
17A. Impeller(A)
20. Sillicon Pad
24. Rotor
28. Sillicon Pad