Interface Introduction - Maxspect Turbine Duo Mode D'emploi

1. While the OLED screen is activated, press both
buttons simultaneously to enter the setup page.
2. Press to switch between the settings.
3. Rotator to set a value.
4. Press to save the setting.
Switching between Automatic and Manual Mode
Manual Mode: Manually set a water movement mode and flow level for your Turbine Duo.
Auto Mode: A set of programs with programmable water movement mode and flow level
which will be cycled every 24hrs.
Manual Mode Interface

Interface Introduction

Main Interface
Setting Page
Operating Instructions
and
< >
3s
Current Time Point
Current Time
Water Movement Mode
Flow Level
Level Indicator
Auto Mode Interface
Time Point(Total 24)
Water Movement Mode
Configurable Variables
English
11