Maxspect Turbine Duo Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41
4.
Always unplug an appliance from an outlet when not in use, before putting on or taking
off parts, and before cleaning. Never yank cord to pull plug from outlet. Grasp the plug
and pull to disconnect.
5.
Do not use an appliance for other than intended use. The use of attachments not
recommended or sold by the appliance manufacturer may cause an unsafe condition.
6.
Do not install or store the appliances where it will be exposed to the weather or to
temperatures below freezing.
7.
Make sure an appliance mounted on a tank is securely installed before operating it.
8.
Read and observe all the important notices on the appliance.
9.
If an extension cord is necessary, a cord with a proper rating should be used. A cord
rated for less amperes or watts than the appliance rating may overheat.
10. The power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them. Never take hold of the plug or cord if your
hand is wet, and always grasp the plug body when connecting or disconnecting it.
11. The appliance is designed to be used in the water ONLY, the entire body of the appliance
must be submersed in the water.
12. To maintain the good performance of the appliance, it should be installed where the
vertical distance between the outlet and inlet is less than 6.5ft (2m).
Precautions
5
English

Publicité

Table des Matières
loading

Table des Matières