Maxspect Turbine Duo Mode D'emploi page 19

2. Restore
This function allows you to restore the firmware to its original factory version. After finish
restoring the firmware, it'll restart automatically and the firmware version number will be
shown on the screen.
1. Rotate to select "Restore".
2. Press to restore the firmware.
3. Reset
This function allows you to reset the appliance back to its factory settings. After finish
resetting the appliance, it'll restart automatically.
1. Rotate to select "Reset".
2. Press to factory reset the appliance.
4. Test Mode
This function allows you to put the appliance in the test mode, which would help our customer
service representative to diagnose the appliance. This should only be done by the users
when told by authorized dealer or customer representative to perform certain test
on the appliance.
5. Model Number
This function will display the model number of the fixture, which also double serves as the ID
name when the Turbine Duo is connected to an iOS or Android device through the Syna-G
system. Under normal circumstances this value should not be changed.
6. Exit
1. Rotate to select "Exit".
2. Press to factory restart the appliance.
Maintenance Instructions
English
17