Addition Of The Remote Control - Schwaiger Green Guard Instructions De Service

USER MANUAL HG1000 532
To change the PIN code, please proceed as follows:
Step 1
You must be in Standby Mode.
Step 4
Now press followed by the
button. The display shows the
following image:
(An additional beep gives acoustic feedback about whether the PIN code was successfully changed – two beeps
mean that an invalid operation has taken place).

7.2. Addition of the remote control

Before you can use one or more remote controls in connection with the Schwaiger
must addition this. For this, proceed as follows:
Step 1
You must be in Standby Mode.
Step 4
Now press followed
by the "2" button + press any
button on the remote control.
Step 2
Now enter "1-2-3-4"
this with .
(An additional beep gives acoustic
feedback as to whether the code
that was selected is right. - Three
beeps mean that the input was not
valid.)
Step 5
In the display, now,
"1"
flash.
Now enter the new 4-digit PIN of
your choice and confirm this with
.
Step 2
Now enter "1-2-3-4"
newly set PIN and confirm this
with .
(An additional beep gives acoustic
feedback as to whether the code
that was selected is right. - Three
beeps mean that the input was not
valid.)
Step 5
In the display, now, the ID number
of the remote control that should be
added, flashes.
(e.g. in the event of registration of
the first remote control, a
pears; if a remote control is already
present and another one is added,
it is "02")
It is recommended to always use
the suggested ID number.
(An additional beep gives acoustic
feedback for the successful regist-
ration at the centre)
Step 3
and confirm If you enter the PIN correctly, the
display now shows the following
image:
Step 6
and "1" In the display, now,
flash.
Enter your new 4-digit PIN for a
second time and confirm this again
with .
"Green Guard"
Step 3
or your If you enter the PIN correctly, the
display now shows the following
image:
Step 6
Confirm the setting using
The centre now automatically
switches into the Standby Mode
again.
"01"
ap-
and "2"
system, you
.
23