Olimpia splendid PELER TOWER Instructions Pour L'installation, L'emploi Et L'entretien page 52

Do not allow the pump (4) to operate without water in the reservoir
in order to prevent damage to the same.
3.4.g - "Ionizing" function key
• When the appliance is on, to start the ionizing function:
- press the "A7" key on the appliance command panel twice or press the
"A7" key on the remote control. LED "B9" switches on.
• To switch the function off:
- press the "A7" key on the appliance command panel twice or press the
"A7" key on the remote control once. LED "B9" switches off.
The two "cooling/humidification" and "ionizing" functions can be used together by
pressing the "A2" and "A7" keys on the remote control or by pressing the "A2/A7"
key on the command panel three times. Both LEDs "B5" and "B9" must be on.
3.4.i - Use of ice box containers (16)
The appliance comes with two ice boxes (16) that can be used to cool down the
air it emits.
The use of the "cooling" function with an ice box (16) placed in the water com-
partment quickly reduces the temperature of the air emitted by the appliance by
3° C approximately.
To use this function:
a. Put the ice boxes in the freezer and wait until they are frozen.
b. Place a frozen ice box in the water reservoir or in the upper water compart-
ment (fig.M).
c. Pour water (preferably cold) into the reservoir without exceeding the "mAX"
level indicated.
d. Start the appliance and select the function by pressing the relevant key; the
LED (B5) must be on.
To exploit the function as well as possible, keep an ice box in the freezer and use
it to replace the one in use when no longer frozen.
EN - 19