Olimpia splendid PELER TOWER Instructions Pour L'installation, L'emploi Et L'entretien page 49

3.3.a - Preliminary operations
• Place the appliance on a stable and not inclined base, at least 15
cm. from the wall or from any other object, in order to ensure the
correct air circulation. Place it on a water-resistant surface since the
possible water leakage could damage furniture or the floor.
• Do not place the appliance directly on carpets, towels, blankets or
other absorbent surfaces.
• Insert the plug in the power socket; the appliance beeps and the
display shows room temperature in °C.
Before electrically connecting the appliance, make sure the plate data
correspond to those of the electricity distribution network.
3.3.b - Filling (fig. G)
It is necessary to add water in the tank before the cooling/humidifier function
is activated.
Water can be added by opening the reservoir door (6).
Make sure that the cap (fig. A - pos.15) is positioned correctly.
- Pour water into the compartment.
- Check the water level in the tank through the water level gauge (7)
(fig.L).
- Close the door (6) again.
• Do not fill the tank beyond the maximum indicated level.
• Always use clean water.
• The appliance could produce a slight smell or the water in the tank
could be slightly coloured during first use; this events are normal and
absolutely harmless for the user's health.
EN - 16
PELER TOWER