Maintenance And Cleaning - Olimpia splendid PELER TOWER Instructions Pour L'installation, L'emploi Et L'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4 - mAINTENANCE AND CLEANING

Before proceeding with any maintenance
and cleaning intervention, always make
sure you disconnected the power plug
from the power socket.
Do not use water to clean the internal parts of the appliance;
risk of electric shocks.
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control
a. Use a dry cloth to clean the appliance and the remote control.
b. It is possible to use a cloth moistened with cold water to clean the appliance
in case it's very dirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic
surface.
4.1.b - Cleaning the filters
Operate as follows:
a. Use a Phillips head screwdriver (not included) to remove the screws (22) (fig. N).
b. Press the two catches (25) to remove the air filter (9) from the body of the
appliance (fig.O).
c. Remove the paper filter (10) from the body of the appliance.
d. Clean both filters (9 and 10) with water and neutral soap. Rinse the filters well
with clean water.
e. If necessary, use a soft brush to clean the air filter more deeply (9).
EN - 20
PELER TOWER

Publicité

Table des Matières
loading

Table des Matières