Hach sc1000 Profibus DP/V1 Manuel D'utilisation De Base page 18

Table 7 Indicator and control registers
PLC WR OK
Write
Bit 00
Register 1
Write
Bit 01
Register 2
Write
Bit 02
Register 3
Write
Bit 03
Register 4
Write
Bit 04
Register 5
INFOR-
MATION:
Write
Bit 05
TRUE
Register 6
indicates
Write
that a write
Bit 06
Register 7
requeest has
been
Write
Bit 07
successfully
Register 8
completed.
Write
Each Bit
Bit 08
Register 9
represents a
write word.
Write
Bit 09
For floating
Register 10
point
Write
numbers 2
Bit 10
Register 11
bits are set
to TRUE
Write
Bit 11
Register 12
Write
Bit 12
Register 13
Write
Bit 13
Register 14
Write
Bit 14
Register 15
Write
Bit 15
Register 16
English 15
PLC WR PLC MASK PLC FIRST
NEW VAL NEW VAL WRITE
INFOR- INFOR-
MATION: MATION:
TRUE C O N T R O L : TRUE
indicates values are indicates
that the written that the
PLC WRITE cyclically If register has
value has TRUE. Only been written
been changed the first time,
changed. values are initialized.
Each Bit written if Each Bit
represents a FALSE. represents a
write word. Default write word.
For floating setting is all For floating
point TRUE point
numbers 2 0xFFFF numbers 2
bits are set bits are set
to TRUE to TRUE
Figure 9 Indicator and control registers
Example Simatic
When HALA09AC.GSD is imported, the slave will be located at
PROFIBUS DP, ADDITIONAL FIELD DEVICES, GENERAL.
1. Select 2 Words from Slave network card.
Each module is 4 bytes of the input address range.